Husqvarna FE 501 2024 vs. Husqvarna FE 350 2024

The Husqvarna FE 501 2024 and the Husqvarna FE 350 2024 are both enduro motorcycles with similar technical specifications. They both have a practical chassis setup for a wide range of uses, precise lines, low vibration level in the saddle, and a robust overall appearance. They also share very practical details, low weight, great ergonomics in the saddle, and plenty of room to move on the bike. Additionally, they both have high-quality chassis and a front suspension with upside-down telescopic forks and a rear suspension with a swing arm and monoshock.

In terms of engine and drive train, the Husqvarna FE 501 2024 has a larger displacement of 510.9 ccm compared to the Husqvarna FE 350 2024 with a displacement of 349.7 ccm. The FE 501 has a bore of 95 mm and a stroke of 72 mm, while the FE 350 has a bore of 88 mm and a stroke of 57.5 mm. Both models have a single-cylinder engine with an electric starter.

When it comes to suspension, both models have front suspension with upside-down telescopic forks from WP with a diameter of 48 mm and a travel of 300 mm. The rear suspension also consists of a swing arm with a monoshock from WP and a travel of 300 mm.

In terms of chassis, both models have a chromium-molybdenum frame with a double cradle, central tube design. They also share the same rake angle of 63.9 degrees.

Husqvarna FE 501 2024

Both models have single disk brakes at the front and the same tire dimensions with a 21-inch diameter at the front and an 18-inch diameter at the rear. The rear tire width is 140 mm.

When it comes to dimensions and weights, both models have a wheelbase of 1487 mm, a seat height of 952 mm, and a fuel tank capacity of 8 liters. The dry weight of the Husqvarna FE 501 2024 is 110.8 kg, while the FE 350 2024 weighs slightly less at 109.4 kg.

Now let's discuss the strengths and weaknesses of each model. The Husqvarna FE 501 2024 has a well-tuned engine that makes use of its enormous potential, providing strong traction and a very pleasant and relaxed riding experience over long distances. It also performs exceptionally well on steep slopes, with good traction and a surprisingly low wheelie tendency. The practical chassis setup, precise lines, low vibration level, and robust overall appearance contribute to its strengths. It also has practical details, low weight, great ergonomics, and plenty of room to move on the bike.

Husqvarna FE 350 2024

On the other hand, the Husqvarna FE 501 2024 has a few weaknesses. The plastics in the boot area quickly look worn, and the prices may be considered expensive. The recessed grip on the seat is also positioned too far forward, and folding out the stand can be a bit fiddly. Additionally, in downhill sections, the motor pushes noticeably harder compared to the lighter models.

Similarly, the Husqvarna FE 350 2024 shares many strengths with the FE 501. It has a practical chassis setup, great traction, precise lines, low vibration level, and a robust overall appearance. It also has practical details, low weight, great ergonomics, and plenty of room to move on the bike. The high-quality chassis and very good balance between power, weight, and handling contribute to its strengths. The engine is powerful but lively, providing sufficient power even at low revs. It also performs well on steep slopes, with lots of traction and a low wheelie tendency.

However, the Husqvarna FE 350 2024 also has the same weaknesses as the FE 501. The plastics in the boot area quickly look worn, and the prices may be considered expensive. The recessed grip on the seat is positioned too far forward, and folding out the stand can be a bit fiddly.

In conclusion, both the Husqvarna FE 501 2024 and the Husqvarna FE 350 2024 are excellent enduro motorcycles with similar technical specifications and strengths. They offer practical chassis setups, great traction, precise lines, low vibration levels, and robust overall appearances. However, they also have some weaknesses, such as worn plastics in the boot area and potentially high prices. Overall, they are both reliable and capable options for enduro enthusiasts.