According to the company, Ilmberger Carbon also works as an OEM supplier for Ducati and BMW and brings experience from the World Superbike and Endurance World Championships. At the show stand, this was evident from two very different builds: the Panigale V4 R is clad in exposed carbon from front mudguard to tail, while the Suzuki wears its carbon beneath the livery celebrating the 40th birthday of the GSX-R line. For the Ducati, the range extends to a complete fairing including winglets and sidepods, whereas the Suzuki parts focus on the tank, frame, swingarm, engine covers and belly pan. What both lines have in common is that the parts are delivered ready to fit and are designed to replace the stock parts without any modifications.

Ilmberger carbon parts Ducati Panigale V4 R and Suzuki GSX-R1000R
62 carbon parts for the Ducati Panigale V4 R and Suzuki GSX-R1000R
At EICMA 2026, the carbon specialist from Oberhaching showed a Ducati Panigale V4 R and a Suzuki GSX-R1000R with barely any stock plastic left, plus Lukas Tulovic's championship-winning bike. The Ducati parts come in gloss or matte, with prices ranging from 119.90 to 899.90 euros.
&width=72&height=72&bgcolor=rgba_39_42_44_0&mode=crop)
NoPain
published on 11/16/2026

Ilmberger Carbon for the Ducati Panigale V4 R from 2025
For the Ducati Panigale V4 R from model year 2025, Ilmberger lists 46 carbon parts, each available in either a gloss or matte finish. The range runs from the sidepods mounting kit at 119.90 euros to the lower front fairing with winglet mounts, which at 899.90 euros is the most expensive single part. Matte and gloss cost the same across the board; only the right tank side cover is listed from 199.90 euros, because the gloss version is slightly pricier at 219.90 euros.
Ilmberger carbon parts for the Ducati Panigale V4 R from MY 2025
| Part | Part no. gloss | Part no. matte | Fits | RRP |
|---|---|---|---|---|
| Exhaust cover left | CG.ACL.021.V4R25 | CM.ACL.021.V4R25 | Panigale V4 R only | € 219.90 | Exhaust cover right | CG.ACR.022.V4R25 | CM.ACR.022.V4R25 | Panigale V4 R only | € 219.90 | Exhaust heat shield | CG.AHS.016.V4P24 | CM.AHS.016.V4P24 | Panigale V4 R, V4, V4 S and Streetfighter V4 | € 399.90 | Heel guard left | CG.FSL.011.V4P24 | CM.FSL.011.V4P24 | Panigale V4 R, V4 and V4 S | € 159.90 | Heel guard right | CG.FSR.012.V4P24 | CM.FSR.012.V4P24 | Panigale V4 R, V4 and V4 S | € 159.90 | Tail fairing left | CG.HVL.012.V4R25 | CM.HVL.012.V4R25 | Panigale V4 R only | € 449.90 | Tail fairing right | CG.HVR.013.V4R25 | CM.HVR.013.V4R25 | Panigale V4 R only | € 449.90 | Instrument cover | CG.IAO.001.V4P24 | CM.IAO.001.V4P24 | Panigale V4 R, V4 and V4 S | € 179.90 | Licence plate holder | CG.NHO.009.V4P24 | CM.NHO.009.V4P24 | Panigale V4 R, V4, V4 S and Streetfighter V4 | € 399.90 | Chain guard | CG.KEH.003.V4R25 | CM.KEH.003.V4R25 | Panigale V4 R only | € 249.90 | Rear mudguard | CG.KHO.015.V4P24 | CM.KHO.015.V4P24 | Panigale V4 R, V4, V4 S and Streetfighter V4 | € 339.90 | Front mudguard, V4 version | CG.KVO.010.V4P24 | CM.KVO.010.V4P24 | Panigale V4 R, V4 and V4 S | € 399.90 | Front mudguard, V4 R version | CG.KVO.020.V4R25 | CM.KVO.020.V4R25 | Panigale V4 R, V4 and V4 S | € 449.90 | Alternator cover | CG.LMD.017.V4P24 | CM.LMD.017.V4P24 | Panigale V4 R, V4, V4 S and Streetfighter V4 | € 199.90 | Monoposto seat | CG.SIO.024.V4P24 | CM.SIO.024.V4P24 | Panigale V4 R, V4, V4 S and Streetfighter V4 | € 699.90 | Engine cover right | CG.MDR.018.V4P24 | CM.MDR.018.V4P24 | Panigale V4 R, V4 and V4 S | € 179.90 | Frame cover left | CG.RAL.019.V4P24 | CM.RAL.019.V4P24 | Panigale V4 R, V4, V4 S and Streetfighter V4 | € 189.90 | Frame cover right | CG.RAR.020.V4P24 | CM.RAR.020.V4P24 | Panigale V4 R, V4, V4 S and Streetfighter V4 | € 189.90 | Subframe cover left | CG.RHL.022.V4P24 | CM.RHL.022.V4P24 | Panigale V4 R, V4, V4 S and Streetfighter V4 | € 159.90 | Subframe cover right | CG.RHR.023.V4P24 | CM.RHR.023.V4P24 | Panigale V4 R, V4, V4 S and Streetfighter V4 | € 159.90 | Sprocket cover | CG.RIA.029.V4P24 | CM.RIA.029.V4P24 | Panigale V4 R, V4, V4 S and Streetfighter V4 | € 189.90 | Swingarm cover left | CG.SCL.005.V4R25 | CM.SCL.005.V4R25 | Panigale V4 R only | € 399.90 | Swingarm cover right | CG.SCR.008.V4P24 | CM.SCR.008.V4P24 | Panigale V4 R, V4, V4 S and Streetfighter V4 | € 339.90 | Tank side cover left | CG.SDL.027.V4P24 | CM.SDL.027.V4P24 | Panigale V4 R, V4, V4 S and Streetfighter V4 | € 199.90 | Tank side cover right | CG.SDR.028.V4P24 | CM.SDR.028.V4P24 | Panigale V4 R, V4, V4 S and Streetfighter V4 | from € 199.90 | Sidepod left | CG.SPL.009.V4R25 | CM.SPL.009.V4R25 | Panigale V4 R only | € 459.90 | Sidepod right | CG.SPR.010.V4R25 | CM.SPR.010.V4R25 | Panigale V4 R only | € 459.90 | Sidepods mounting kit | CG.VHK.100.V4R25 | CM.VHK.100.V4R25 | Panigale V4 R only | € 119.90 | Pillion seat cover | CG.SIA.013.V4P24 | CM.SIA.013.V4P24 | Panigale V4 R, V4, V4 S and Streetfighter V4 | € 249.90 | Tank cover | CG.TAO.014.V4P24 | CM.TAO.014.V4P24 | Panigale V4 R, V4 and V4 S | € 319.90 | Lower tank cover | CG.TAU.019.V4R25 | CM.TAU.019.V4R25 | Panigale V4 R only | € 199.90 | Tank fairing | CG.TAV.014.V4R25 | CM.TAV.014.V4R25 | Panigale V4 R only | € 449.90 | Lower front fairing with winglet mounts | CG.VEO.008.V4R25 | CM.VEO.008.V4R25 | Panigale V4 R only | € 899.90 | Upper fairing | CG.VEO.011.V4R25 | CM.VEO.011.V4R25 | Panigale V4 R only | € 439.90 | Side fairing panel left | CG.VEL.015.V4R25 | CM.VEL.015.V4R25 | Panigale V4 R only | € 359.90 | Side fairing panel right | CG.VER.016.V4R25 | CM.VER.016.V4R25 | Panigale V4 R only | € 359.90 | Lower fairing left | CG.VUL.006.V4R25 | CM.VUL.006.V4R25 | Panigale V4 R only | € 599.90 | Lower fairing right | CG.VUR.007.V4R25 | CM.VUR.007.V4R25 | Panigale V4 R only | € 599.90 | Radiator cover with sidepod preparation | CG.WCC.017.V4R25 | CM.WCC.017.V4R25 | Panigale V4 R only | € 849.90 | Air duct cover left | CG.WAL.002.V4P24 | CM.WAL.002.V4P24 | Panigale V4 R, V4 and V4 S | € 219.90 | Air duct cover right | CG.WAR.003.V4P24 | CM.WAR.003.V4P24 | Panigale V4 R, V4 and V4 S | € 219.90 | Winglet left | CG.VFL.001.V4R25 | CM.VFL.001.V4R25 | Panigale V4 R, V4 and V4 S | € 419.90 | Winglet right | CG.VFR.002.V4R25 | CM.VFR.002.V4R25 | Panigale V4 R, V4 and V4 S | € 419.90 | Ignition lock cover | CG.ZSA.004.V4P24 | CM.ZSA.004.V4P24 | Panigale V4 R, V4 and V4 S | € 199.90 | Cylinder head cover left | CG.ZAL.025.V4P24 | CM.ZAL.025.V4P24 | Panigale V4 R, V4, V4 S and Streetfighter V4 | € 289.90 | Cylinder head cover right | CG.ZAR.004.V4R25 | CM.ZAR.004.V4R25 | Panigale V4 R only | € 159.90 |
Prices according to the Ilmberger Carbon online shop incl. VAT, as of 13.11.2026. Gloss and matte versions at the same price unless otherwise stated. Fitment according to manufacturer, Panigale V4, V4 S and Streetfighter V4 each from model year 2025.
Not every part is built exclusively for the R. The code in the part number tells you which kit a part comes from: anything with V4R25 in the name was developed for the Panigale V4 R, anything with V4P24 comes from the range for the Panigale V4 and V4 S from 2025. According to the manufacturer, 27 of the 46 parts also fit the V4 and V4 S, 15 of which additionally fit the Streetfighter V4 from 2025, while 19 parts, above all the fairing, the sidepods and the tail section, fit the R only.
Anyone wanting to completely re-clothe the Panigale inevitably ends up with the large fairing parts. Alongside the front fairing with winglet mounts, these include the upper fairing at 439.90 euros, the two lower fairing panels at 599.90 euros each and the radiator cover with sidepod preparation and reinforcements at 849.90 euros. The winglets cost 419.90 euros per side, the sidepods 459.90 euros each. According to the fitment list, these fairing parts are intended for the road-legal Panigale V4 R, while the tank, swingarm, chain guard and winglets also fit the race version, the Panigale V4 R Racing.
Doesn't give plastic a chance.
NoPain on the Ilmberger Panigale V4 R

Lukas Tulovic's Superbike What such a build looks like on the race track was shown by the number 1 bike on the stand. Lukas Tulovic, who won the IDM Superbike title in 2025, defended his crown in 2026 in the Euro Moto Superbike by a margin of half a point. His Panigale V4 R carries the Ilmberger logo on the fairing, and the display board next to the bike, titled Ducati Panigale V4R Racing 2026, listed the fitted carbon parts with part numbers and prices. Alongside parts from the street range, it includes components with the suffix Racing, such as the race fairing, tail unit with seat kit and air intake duct, which are not yet listed on the Panigale V4 R shop page.

Ilmberger Carbon for the Suzuki GSX-R1000R from 2026
- How much does a Suzuki GSX-R1000R cost?
- Here you will find an overview of the price level of new and used motorbikes!
Suzuki brought the GSX-R1000R back to Europe for 2026 with Euro 5+, and Ilmberger is following suit with its own range, listed under the title GSX-R 1000 2026 Carbon. However, the 16 parts carry the code GXR16 in the part number and, according to the manufacturer, fit both the GSX-R1000 and GSX-R1000R from model years 2017 to 2021 and the 2026 model. That's good news for owners of the predecessor too, whose GSX-R can be upgraded with the same parts.
Ilmberger carbon parts for the Suzuki GSX-R1000R MY 2017 to 2021 and 2026
| Part | Part no. | RRP |
|---|---|---|
| Heel guard left | FSL.016.GXR16.K | € 149.90 | Heel guard right | FSR.015.GXR16.K | € 149.90 | Licence plate holder | NHO.010.GXR16.K | € 349.90 | Chain guard | KEH.003.GXR16.K | € 199.90 | Rear mudguard | KHO.002.GXR16.K | € 299.90 | Front mudguard | KVO.001.GXR16.K | € 279.90 | Clutch cover protector | KDA.013.GXR16.K | € 199.90 | Alternator cover protector | LMD.014.GXR16.K | € 199.90 | Frame cover left | RAL.012.GXR16.K | € 279.90 | Frame cover right | RAR.011.GXR16.K | € 279.90 | Swingarm cover left | SAL.008.GXR16.K | € 199.90 | Swingarm cover right | SAR.007.GXR16.K | € 199.90 | Upper tank cover | TAO.009.GXR16.K | € 299.90 | Lower tank cover left | TUL.006.GXR16.K | € 269.90 | Lower tank cover right | TUR.005.GXR16.K | € 269.90 | Lower fairing | VEU.017.GXR16.K | € 799.89 |
Prices according to the Ilmberger Carbon online shop incl. VAT, as of 13.11.2026. Fitment according to manufacturer: GSX-R1000 and GSX-R1000R 2017 to 2021 as well as GSX-R1000R 2026.
Prices range from 149.90 euros for a heel guard to 799.89 euros for the lower fairing, which sits under the engine as a belly pan. In between, you'll find upper and lower tank covers, frame and swingarm covers, front and rear mudguards, a licence plate holder and covers for the clutch and alternator covers. For the chain guard, Ilmberger promises around 70 percent less weight than the stock part, though the manufacturer doesn't provide a figure in grams.
On the stand, the GSX-R1000R in its 40th anniversary livery wore the tank covers with GSX-R lettering, the belly pan with Ilmberger logo, the licence plate holder and the swingarm cover. Compared to the Ducati, the Suzuki range is considerably slimmer, as side fairings, upper fairing and winglets aren't available for the GSX-R. So if you're prepping your Suzuki for a track day, Ilmberger has you covered for the tank, frame and engine - the race fairing you'll have to source elsewhere.

Prepreg, autoclave and plastic coating: how Ilmberger Carbon makes its parts
All parts are made from prepreg, i.e. carbon fibre fabric that is already pre-impregnated with resin. According to the manufacturer, each component goes through more than 30 manual production steps and is cured in several stages in the autoclave before a robot trims the edges. Production is ISO 9001 certified, and the parts are delivered ready to fit.
Ilmberger takes its own approach to the surface finish: instead of relying solely on a clear coat, the company says it is the only manufacturer to use a special plastic coating designed to increase scratch resistance and UV resistance. In practice, this matters for heel guards, chain guards and mudguards, which take a beating from boot soles, stone chips and chain spray. The claim of TÜV-certified quality refers to the production process and is no substitute for checking the specific installation, which is why checking the fitment list for each item before ordering is a must.

Prices, availability and ordering
All prices include VAT and apply to the Ilmberger Carbon online shop. At the time our article was published, some of the items were available for immediate delivery, while many of the large fairing parts for the Panigale and around half of the Suzuki parts were marked as available to back-order. If you're planning a complete conversion, it's best to check delivery times directly with Oberhaching in advance.
Ilmberger Carbonparts Hahilingastraße 5 82041 Oberhaching Germany
Phone +49 89 24215810 Email info@ilmberger-carbon.com
You can find all parts for the Ducati Panigale V4 R at ilmberger-carbon.com/de/Carbon/PanigaleV4R26, and the Suzuki parts at ilmberger-carbon.com/de/Carbon/GSXR26.
- How much does a Ducati Panigale V4 R cost?
- Here you will find an overview of the price level of new and used motorbikes!
More from 1000PS Magazine
Ilmberger carbon parts Ducati Panigale V4 R and Suzuki GSX-R1000R Images
Source: 1000PS
Ilmberger lists 46 carbon parts for the 2025-onward Panigale V4 R, each available in a gloss or matte finish.
Manufactured in Oberhaching near Munich, Ilmberger also supplies Ducati and BMW as an OEM, according to the company.
At €899.90, the lower front fairing with winglet mounts is the most expensive individual part in the range.
At Ilmberger, matte and gloss finishes cost almost the same across the board. The only exception is the right-hand tank side panel, which costs €20 more in gloss.
According to the manufacturer, 27 of the 46 parts also fit the 2025-onward Panigale V4 and V4 S.
19 parts, primarily the fairings, side pods and tail section, are exclusive to the R.
Every component is made from prepreg and cured in multiple stages in an autoclave.
The license plate holder costs €399.90 and also fits the V4, V4 S and Streetfighter V4 from 2025 onwards.
The tail fairing is available for €449.90 per side and fits the Panigale V4 R only.
The left and right tail fairings have separate part numbers: CG.HVL.012.V4R25 and CG.HVR.013.V4R25.
At Ilmberger, a robot trims the edges of every part to ensure a precise fit with the standard bodywork.
The monoposto seat costs €699.90 and replaces the pillion seat.
The monoposto seat is available in gloss or matte finish at the same price.
The gloss version carries part number CG.SIO.024.V4P24; the matte version, CM.SIO.024.V4P24.
Instead of a simple clear coat, each part has a plastic coating designed to protect it from scratches and UV exposure.
The tail sections bearing the V4R25 article code were developed specifically for the Panigale V4 R.
A fairing side panel costs €359.90 and fits the V4 R only.
The chain guard, priced at €249.90, also fits the Panigale V4 R Racing version.
The chain guard is an R-only part and does not fit the V4 or V4 S.
The chain guard is also available in a matte finish under part number CM.KEH.003.V4R25 at the same price.
The upper fairing panel costs €439.90, while the tank cover is €449.90.
The large fairing panels are designed for the road-legal V4 R, not the race version.
The parts are listed in the shop under the title Panigale V4 R 2026 Carbon.
According to the manufacturer, the tank cover fits the V4 R and V4 R Racing, but not the V4 or V4 S.
The carbon subframe cover costs €159.90 per side and also fits the Streetfighter V4.
The rear hugger costs €339.90 and fits all Panigale V4 models from 2025 onwards.
The fender can also be fitted to the Streetfighter V4 from 2025 onwards.
The brake duct is part of the R-spec front fender, which costs €449.90.
The front fender is available in a V4 version for €399.90 and an R version with brake ducting for €449.90.
Each winglet costs €419.90 and also fits the 2025-onward V4 and V4 S.
The winglets are mounted on the lower fairing, which features dedicated mounting points.
Behind the side fairing sits the radiator cover with Sidepod preparation, priced at €849.90.
The passenger seat cover costs €249.90; it is not available for the racing version.
The tank cover costs €319.90 and fits all Panigale V4 models from 2025 onwards.
The tank cover comes from the V4 range, as indicated by the V4P24 code in the part number.
The left side cover costs €199.90, while the right one starts at €199.90.
The side panels are from the V4 range and also fit the Streetfighter V4.
The ignition switch cover costs €199.90.
Ilmberger handcrafts every part in more than 30 steps.
The entire rear section for the Panigale V4 R is available in carbon, from the license plate holder to the monoposto seat.
Together with the R-spec front fender, the pair of fenders costs €789.80.
A frame cover costs €189.90 per side.
The frame covers fit all Panigale V4 models and 2025-on Streetfighter V4 models.
A heel guard costs €159.90 and has to withstand boot soles above all.
According to the manufacturer, production is ISO 9001 certified.
Ilmberger supplies all parts ready to fit.
A lower fairing panel costs €599.90 per side.
The left and right lower fairing panels cost €1,199.80 together.
The lower fairing panel only fits the road-legal V4 R.
The R fender costs €50 more than the V4 version, but comes with an integrated brake duct.
A pair of winglets costs €839.80.
According to the manufacturer, the winglets also fit the V4 R Racing race version.
The upper fairing panel costs €439.90 and fits the V4 R only.
The upper fairing replaces the plastic panel around the headlights.
The V4 R’s front end can be built entirely from carbon. The upper and lower sections together cost €1,339.80.
The V4 version of the front fender costs €399.90 and fits the V4, V4 S and V4 R.
Ilmberger doesn’t list a weight for the front fender, only the material: prepreg carbon.
The air duct channels airflow onto the brake caliper and is integrated into the R-spec front fender.
According to the manufacturer, the R fender fits the V4, V4 S and V4 R from 2025 onwards, as well as the Racing version.
The heel guards fit all Panigale V4 models from 2025 onwards, as well as the racing version.
The left swingarm cover costs €399.90 and fits the V4 R only.
Beneath the frame cover, the engine cover remains metal. Ilmberger offers a dedicated alternator cover for €199.90.
Ilmberger says it draws on experience from the Superbike and Endurance World Championships.
The right-side swingarm cover costs €339.90 and also fits the V4, V4 S and Streetfighter V4.
The cover extends to the rear axle, protecting the swingarm from stone chips.
Both swingarm covers together cost €739.80.
A side pod costs €459.90, with the fitting kit adding €119.90.
Lukas Tulovic won the 2026 Euro Moto Superbike championship with this bike for Triple M Racing Ducati Frankfurt.
Tulovic defended his 2025 IDM Superbike title by just half a point.
The display board listed the bike as the 2026 Ducati Panigale V4 R Racing, complete with all carbon parts and prices.
The race bike combines road-going parts with dedicated racing components.
Even the race bike runs the R-spec front fender from the road range.
The brakes run much hotter on track than on the road, hence the large opening.
According to Ilmberger, the winglets from its road range also fit the Panigale V4 R Racing.
In the road-going version, an Ilmberger winglet costs €419.90 per side.
The race fairing, marked with the additional “Racing” designation, was displayed on the show stand but has yet to appear in the shop.
Tulovic runs number 1 as the 2025 IDM Superbike champion.
A dedicated mounting kit for the race fairing lets the number plate double as a racing part.
The racing version has its own fitment list, with road-going parts such as the number plate holder omitted.
According to Ilmberger, the tank cover and tank fairing also fit the racing version of the V4 R.
The carbon intake ducts are listed on the display board as a standalone racing part.
According to the display board, the tail unit with seat kit is available as a racing part, but it’s not in the shop yet.
The IDM has been known as Euro Moto since the 2026 season.
The seat pad is by Race Seats, with the carbon-fibre shell underneath supplied by Ilmberger.
According to the manufacturer, the chain guard from the street range also fits the racing version.
The left swingarm cover is also listed as a fitment for the V4 R Racing.
The exhaust heat shield costs €399.90 in the road trim package.
As on the road bike, the cover extends all the way to the rear axle.
According to Ilmberger, the tank cover fits all Panigale V4 models from 2025 onwards, including the racing version.
According to Ilmberger, the frame covers also fit the racing version of the V4 R.
Ilmberger offers this front fender for all Panigale V4 models from 2025 onwards.
Ilmberger says it supports teams in the IDM, WorldSBK and the Endurance World Championship.
Ilmberger offers 16 carbon parts for the 2026 GSX-R1000R, which also fit model years 2017 to 2021.
Ilmberger doesn’t offer a carbon side fairing panel for the GSX-R.
The front fender costs €279.90.
The lower tank covers cost €269.90 each.
A frame cover costs €279.90 per side.
The part numbers carry the GXR16 prefix; the parts were originally developed for the model introduced in 2017.
The left and right frame covers together cost €559.80.
A swingarm cover costs €199.90 per side.
The license plate holder costs €349.90 and incorporates the turn signals.
It fits the 2017–2021 GSX-R1000 and GSX-R1000R, as well as the 2026 models.
The rear fender costs €299.90.
At €799.89, the belly pan is the most expensive part in Suzuki’s range.
The front and rear fenders together cost €579.80.
According to the shop, all 16 Suzuki parts together cost €4,428.39.


