The handlebar risers are made of anodized aluminum and are available in either natural or black. Thanks to ABE type approval, no additional registration is required - saving time and money. Easy installation with the included hardware makes the upgrade especially appealing for DIY mechanics. Important: the length of cables and lines should be checked beforehand. If necessary, the manufacturer offers suitable extension adapters.
Hepco & Becker handlebar risers: More comfort for long tours
Ergonomic riding comfort for over 300 models
More riding pleasure through an optimized seating position - that's what Hepco & Becker promises with its new handlebar risers, which according to the manufacturer should significantly improve touring comfort. The slightly altered handlebar position could significantly reduce tension and back pain on long distances.
&width=72&height=72&bgcolor=rgba_39_42_44_0&mode=crop "Author: Der Horvath")
Der Horvath
published on 6/16/2025
3,111 Views
Comfort through a simple measure
Different variants for individual requirements
The handlebar risers from Hepco & Becker are available for over 300 motorcycle models and come in different versions:
- Spacers or sleeves under the handlebar clamps - using the original clamps
- Handlebar risers below the handlebar using the original upper clamp
- Complete sets with lower and upper clamp
- Risers starting from the triple clamp
They are available in heights of 20, 25, 30 and 35 mm - on request also with offset.
Hepco & Becker handlebar risers: attractively priced
With an RRP starting at €35.00 per set, the new risers sit in the affordable accessory segment. For many riders, the investment in more comfort and control could pay off quickly - especially on frequent and long tours. More info is available at the Hepco & Becker Online Shop.
Conclusion: Hepco & Becker handlebar risers for more relaxed touring
The handlebar risers raise the handlebar and, in some variants, bring it back toward the rider via offset, making the seating position more upright and, according to the manufacturer, reducing tension on long stretches. They are available for handlebar diameters from 22.2 to 32 millimeters, in heights from 20 to 35 millimeters, in silver or black, and for over 300 models. Installation is uncomplicated; only the brake and clutch lines need to be checked for length and extended if necessary. All sets carry an ABE and cost from 35 euros. For touring riders with back or neck issues, this is an affordable lever for more comfort.
Hepco & Becker handlebar risers: More comfort for long tours Images
Source: 1000PS
BMW M1000R - 35 mm rise - 15 mm pull-back handlebar relocation with offset - black anodized
BMW R1200 GS - 30mm higher - 15mm rearward handlebar relocation with offset - natural anodized
BMW RnineT - 25mm lower - 23mm rearward handlebar relocation with offset - natural anodized
Honda - ADV350 - ADV 750 - 30mm raised - natural anodized
Honda CB500 F - 30 mm higher - 21 mm back handlebar relocation with offset - black anodized
Honda CMX 1100 - 500 Rebel - 30 mm lower - 21 mm rearward handlebar relocation with offset - black anodized
Honda CRF 1100 L Africa Twin - 30 mm higher - 21 mm rearward handlebar relocation with offset - black anodized
Kawasaki Z 900 RS - 20mm lift - black anodized
Kawasaki Z900 SE - 25mm Lift - black anodized
KTM 890 Adventure R Rally - 25 mm lift - black anodized
KTM 1290 Super Duke R - 25 mm riser - natural anodized
Suzuki GSX-S 750 - 20mm Lift - natural anodized
Triumph Bonneville T100 SE - 30mm higher - 21mm rearward handlebar offset - natural anodized
Triumph Tiger 850-900 Rally-GT-Pro - 20 mm Lift - natural anodized
Yamaha MT-10 - 30 mm higher - 25 mm rearward handlebar relocation with offset - black anodized