Yamaha WR250F 2013 vs. Yamaha WR250F 2016

Yamaha WR250F 2013

Yamaha WR250F 2016

Overview - Yamaha WR250F 2013 vs Yamaha WR250F 2016

Yamaha WR250F 2013

Yamaha WR250F 2016

Technical Specifications Yamaha WR250F 2013 compared to Yamaha WR250F 2016

Yamaha WR250F 2013

Yamaha WR250F 2016

Yamaha WR250F 2013

Yamaha WR250F 2016

Engine and Drive Train

Bore	Bore	77 mm	Bore	77 mm
Stroke	Stroke	53.6 mm	Stroke	53.6 mm
Compression Ratio	Compression Ratio	12.5	Compression Ratio	12.5
Starter	Starter	Kick	Starter	Kick
Clutch Type	Clutch Type	Multiplate in oil-bath	Clutch Type	Multiplate in oil-bath
Ignition	Ignition	CDI	Ignition	CDI
Transmission	Transmission	Chain	Transmission	Chain
Number of gears	Number of gears	5	Number of gears	5
Cylinders	Cylinders	1	Cylinders	1
Strokes	Strokes	4-Stroke	Strokes	4-Stroke
Valves per cylinder	Valves per cylinder	5	Valves per cylinder	5
Valves	Valves	DOHC	Valves	DOHC
Cooling	Cooling	liquid	Cooling	liquid
Displacement	Displacement	250 ccm	Displacement	250 ccm

Suspension Front

Front suspension	Front suspension	Telescopic fork	Front suspension	Telescopic fork

Chassis

Frame	Frame	Aluminium	Frame	Aluminium
Frame type	Frame type	Twin Tube	Frame type	Twin Tube

Brakes Front

Technology	Technology	Wave	Technology	Wave

Brakes Rear

Type	Type	Disc	Type	Disc

Dimensions and Weights

Length	Length	2,190 mm	Length	2,190 mm
Width	Width	825 mm	Width	825 mm
Height	Height	1,305 mm	Height	1,305 mm
Wheelbase	Wheelbase	1,485 mm	Wheelbase	1,485 mm
Seat Height	Seat Height	990 mm	Seat Height	990 mm
Dry Weight	Dry Weight	118 kg	Dry Weight	118 kg
Fuel Tank Capacity	Fuel Tank Capacity	8 l	Fuel Tank Capacity	8 l

Pros and Cons in comparison

Yamaha WR250F 2013

Unfortunately, our editors did not test this model.

Yamaha WR250F 2016

The Yamaha now has 69 hours on the clock. The chassis shone, as it did in the first test, and so did the engine with the Akrapo muffler. It is very economical and a lot of fun to ride, because it doesn't overtax and the Kayaba chassis gives a lot of security. What has been done so far: Regular oil change and air filter replaced. The fork oil seals have been leaking for a short time, but after careful cleaning with a valve gauge they are now tight again. Drive set after approx. 70%, rear brake pads replaced, front still approx. 30%.