How to properly clean and lube a motorcycle chain

How to properly clean and lube a motorcycle chain

Making your chain kit last longer

The chain is one of the most heavily stressed components on a bike – and at the same time one whose condition can be significantly influenced with relatively little effort. Clean it regularly, lube it properly and avoid a few simple mistakes, and you'll reduce wear and can extend its service life.

Philipp

Philipp

published on 17/09/2026

4,585 Views

Chain care is probably one of those jobs on a bike that hardly anyone genuinely enjoys. It's dirty, takes a few minutes, and by the next rainy day at the latest, the whole thing looks a lot less satisfying again.

Still, the effort is worth it, because the motorcycle chain transfers the engine's power to the rear wheel every time you accelerate, while being exposed to dirt, water, dust and abrasion. And through all that, it's supposed to work as evenly and reliably as possible for many thousands of kilometres.

The good news: proper chain care isn't rocket science. What really matters is doing the steps in the right order and using high-quality care products.

Clean first, then lube

Simply spraying fresh chain lube over the existing deposits on a regular basis isn't a particularly sustainable strategy.

Over time, lubricant residue combines with dust, sand and fine metal particles. What started out as a protective lubricating film can turn into a pretty unappetising mixture. In the worst case, the dirt trapped in it also acts as an abrasive and accelerates wear.

That's why the chain should be thoroughly cleaned from time to time before fresh lubricant is applied.

Cleaning has another advantage too: you automatically take a closer look at the condition of the chain kit. Uneven wear, damaged rollers or odd chain tension are much easier to spot on a clean chain.

Best to clean the chain after a short ride

A little practical tip from Motorex's experience: the chain is particularly easy to clean after a short ride.

The slight warming makes the existing lubricant a bit thinner, so it can be dissolved more easily. Mind you, we're talking about a warm chain here, not a scorching hot one.

For cleaning, Motorex offers the Chain Clean Degreaser. The actual mechanical work can be helped along with a suitable chain brush – at Motorex, for example, the Chain Brush – and a microfibre cloth.

Afterwards, one thing matters above all: the chain should be completely dry before fresh lubricant is applied.

Motorex chain care

Important: after the initial rough clean, old chain spray and dirt should be removed with the chain cleaner.

How often should you service a motorcycle chain?

A fixed mileage only works to a limited extent.

How often the next cleaning and lubrication is needed depends heavily on where and how the bike is ridden. A fair-weather road bike has different requirements than an adventure bike that regularly tackles dusty gravel tracks.

At the latest when the chain looks noticeably dirty or conspicuously dry or bare, you should check it. It's also worth taking a look at the chain after long rides in the rain, in lots of dust or after off-road outings. After all, water and dirt can affect the existing lubricating film much faster than a leisurely Sunday ride in dry weather.

The condition of the chain is therefore a better indicator than a rigid mileage schedule.

Applying chain spray properly: not a lot, but precisely

When it comes to lubing, a classic rule applies: more doesn't automatically mean better. What matters is that the lubricant ends up where it's needed.

Motorex recommends applying the appropriate Chainlube to the inner side or running surface of the chain – in other words, where the rollers later engage with the front sprocket and rear sprocket. A thin, even layer is sufficient.

Drenching the chain in chain spray doesn't necessarily improve lubrication. The excess lubricant tends to end up on the rim, hugger or tail during the next ride anyway, and attracts additional dust and dirt. The result is above all one thing: more work at the next cleaning.

Motorex chain care

Apply chain spray sparingly and precisely – more doesn't help more!

Why you shouldn't lube the chain five minutes before setting off

Chain spray needs some time after application. The solvents it contains have to evaporate so that an adhesive lubricating film can form. If you ride off immediately after spraying, you risk a large part of the lubricant being flung off again.

Motorex therefore recommends ideally letting the chain dry overnight. In practice, that means: better to lube in the evening after your last ride than the next morning five minutes before setting off. The time spent is the same, the result generally more sensible.

Brake discs and tyres are off-limits for chain spray

As trivial as it sounds: when applying chain spray, pay very close attention to where you're spraying.

Brake discs, brake pads, tyres and other friction surfaces must absolutely stay free of lubricant. After all, an adhesive lubricating film there is exactly the opposite of what you want.

Motorex therefore also recommends a quick brake test after chain care. If you want to play it safe, spray in a controlled manner and close to the chain. Less overspray means less chance of lubricant landing where it definitely has no business being.

By the way, you can knock up a shield from an old cardboard box in no time, so the chain spray mist doesn't end up on the tyre and co. after all. And a second piece of cardboard on the floor underneath doesn't hurt either.

Which chain spray for which use?

Not every motorcycle chain is operated under the same conditions. Accordingly, Motorex distinguishes between several lubricants for different areas of use.

For very high loads in racing there's Chainlube Racing, while Chainlube Road is intended for classic road use.

If you mainly ride off-road on mx bikes or enduros, Chainlube Off-Road is a variant designed specifically for that.

For adventure bikes and motorcycles ridden on both tarmac and unpaved tracks, Motorex in turn offers Chainlube Adventure.

Here you'll find the overview of all Motorex chain sprays.

The basic idea behind it makes sense: a chain lubricant for a road bike has to cope with different conditions than one that regularly gets dragged through dust, mud and off-road terrain.

Chain care doubles as a chain inspection

Regular maintenance is also a good opportunity to give the entire chain kit a quick check. Does the chain run smoothly? Are there any individual stiff links? Do the rollers look normal? Is the chain tension right?

These are exactly the kinds of things you usually notice when you're sitting right in front of the chain anyway, rather than wondering about strange noises while riding. The front and rear sprockets deserve a look too. After all, chain, front sprocket and rear sprocket form a single system and wear together accordingly.

Conclusion: a few minutes of chain care can go a long way

Proper chain care can be boiled down to a fairly simple sequence: inspect, clean, let dry, lube precisely and give the chain spray time to flash off.

The key is not to get as much chemistry onto the chain as possible, but to regularly remove existing dirt and then build up a clean lubricating film.

For this, Motorex offers suitable products for different areas of use with the Chain Clean Degreaser, the Chain Brush and the various Chainlube variants.

Regardless of which product ends up in your garage, though: if you keep a regular eye on the condition of your chain and don't wait to react until it's dry, rusty and noisy, you reduce unnecessary wear and increase the chances that chain, front sprocket and rear sprocket will do their job together for as long as possible.

And if, after servicing, less chain spray ends up on the rim than on the chain, your dosage probably wasn't too far off either.

Motorex chain care

Good to know: there are different chain sprays depending on the application.