When road grime, salt, and moisture have built up on your bike over the winter, it's about time for a thorough clean. Pressure washers are unsuitable, especially for electric motorcycles, as the risk of damaging electrical components is too great. Instead, a gentle hand wash with water, brushes, and wash mitts is recommended. The cleaning process is supported by products like Motul Moto Wash, which reliably removes dirt. For a well-maintained finish, Motul Shine & Go not only cleans plastic and chrome parts but also leaves a protective layer.

Motorcycle Maintenance for the Season Kickoff
Get Your Bike Spring-Ready
Seven Easy Steps for Enhanced Safety and Riding Fun in the New Motorcycling Year.
&width=72&height=72&bgcolor=rgba_39_42_44_0&mode=crop)
Der Horvath
published on 11/05/2025
1. Deep Clean Instead of Superficial Wash

2. Maintain Drive and Moving Parts
A clean and well-lubricated chain is crucial for power transfer and protects against unnecessary wear. Motul Chain Clean helps remove old residues before Motul Chain Lube Road or Off Road provides fresh lubrication, depending on the application. Other moving components like levers and joints also appreciate a drop of Motul Tech Grease 300.

3. Monitor Fluid Levels
Engine oil, brake fluid, and coolant deserve a critical check after winter. An oil change with high-quality lubricants, such as those from Motul, protects the engine and extends its lifespan. Motul Brake Fluid is recommended for brake systems, while Motul Motocool ensures reliable cooling—especially on hot days in winding roads.

4. Check Tires and Brakes
Tread depth, cracks, and tire pressure must be checked before the first ride. It's wise to check the braking system as well—worn pads or grooves in the disc are a no-go. Motul Brake Clean can be used to degrease the discs if necessary, but it should not come into contact with lubricated parts.
5. Inspect Electrical System and Battery
After a long period of inactivity, many batteries tend to weaken. Therefore, fully charge and check whether the electrical components like indicators, lights, and horn are functioning properly. Electric motorcycle riders should additionally ensure cell balance and charge status—early maintenance before the season begins is worthwhile here.
6. Optimize with Additives
Less consumption, cleaner engine operation, and increased efficiency—these are the promises of additives like Motul Engine Clean Moto, which is used before an oil change to remove internal residues. Motul Boost & Clean cleans the fuel system, promising improved combustion and protection against deposits.

7. Adjust Suspension and Tighten Bolts
Forks and shocks should not be neglected. Checking for leaks, proper function, and appropriate preload is as important as tightening critical bolt connections. Winter vibrations and temperature fluctuations can cause slight loosenings that need to be addressed now.
Conclusion: Spring Check Brings Safety and Joy
Those who bring their motorcycle out of hibernation in time and get it in shape with the right care benefit from increased safety, reliable technology, and not least, a great feeling on the first ride down their favorite route. With the right tools and care products—such as those from Motul's range—starting the season is stress-free and with peace of mind.